The remote control HRC BM - Bass Management, optional for DPower 1, provides the ability to adapt the subwoofer level (-20 / + 6 dB) to any personal preference and favorite music genre.

The Alpine BBX-T600 amplifier designed for europethis new bbx amplifier gives you alpine power performance at an amazing price they’re designed to fit easily in virtually any system. high power, great valuethis amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. high pass and low pass filtersthese two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.

The Alpine BBX-F1200 BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. High Power, Great Value. This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters. These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.

Want a simple way to crank up the power of your receiver? Alpine's "Power Pack" amplifier increases your receiver's power output to 45 watts RMS by 4 channels. That's a big jump up from the 7-20 watts per channel typically put out by a car radio, and plenty of power to drive high-performance speakers or keep up with a big subwoofer amplifier. Best of all, this compact amplifier is so efficient you can often run it off the same circuit that powers your receiver. A universal plug lets you feed a signal via RCA outputs or speaker-level wiring.

 Yes, ladies and gents, Kicker's 42PXA200.1 amplifier is a 200-watt powerhouse that's not much bigger than a deck of cards. That's right, it's astonishingly small for an amp, which means you can get creative and stash it in nearly any nook or cranny in your car. And at that size, we bet you could find a place for it on your ATV or boat too.

Kicker's 42PXA200.2 amp delivers up to 100 watts per channel, yet it's no bigger than a brick. That's right, it's astonishingly small, which means you can get creative and stash it in nearly any nook or cranny in your car. And at that size, why not install it on your motorcycle, ATV or boat?

JL Audio's JX Series amplifiers were very popular with our customers, garnishing rave reviews citing their tremendous performance and value. We think their latest JD Series amps will follow in their footsteps, offering superior power and serious features for your dollar. The JD250/1 mono subwoofer amplifier will send up to 250 watts RMS to a sub, so you'll hear and feel the bass clearly over road and engine noise. A variable low-pass filter and bass boost help you tune your sub to fit your system and sound its best. An optional wired remote control lets you turn the sub up or down from the front seat.

Want a simple way to kick up the power of your Alpine receiver? Alpine's "Power Pack" amplifier increases your Alpine receiver's power output to 45 watts RMS power by 4 channels — plenty of power to drive high-performance speakers or keep up with a big subwoofer amplifier.

A little power goes a long way in making your day out on the water more fun. Kicker's KMA150.2 marine amplifier can power 2 speakers with 40 watts RMS each, so you'll hear your music clearly over the sounds of the wind and waves. You could also use this amp in bridged, one-channel mode to power a subwoofer with 150 watts RMS.

Any basshead will tell you that big power is key to great sound, but sometimes you just don't have much space for a big amp. Kenwood's Excelon X502-1 mono subwoofer amplifier can send up to 500 watts RMS to your subwoofer, and it'll fit almost anywhere in your vehicle. A precise low-pass filter lets you optimize the sound for your sub, while the built-in bass boost lets you dial in just the right amount of thump.

Need power, but lack space? Kenwood's Excelon X302-4 four-channel amplifier delivers 50 watts RMS per channel, yet still fits almost anywhere in your vehicle. Switch this amp over to bridged, 2-channel mode, and you can power a pair of high-performance speakers or subs with 150 watts RMS each. In 3-channel mode, you can use the amp's front channels to drive a pair of speakers with 50 watts each, and bridge the rear channels to send 150 watts to a sub. This versatility pays off as your system evolves over time.

Rockford Fosgate's Prime Series R2-200X2 amplifier can power two speakers with 50 watts RMS each, so you'll hear your music clearly over the noises of the wind and road. You could also use this amp in bridged, 1-channel mode to power a subwoofer with up to 200 watts RMS. High- and low-pass filters help you get maximum performance from the speakers in your vehicle.

Do you like clean bass? Kicker's CXA400.1T mono subwoofer amplifier can put out up to 400 watts RMS, so your bass will both sound loud and full. The quality of the bass tone matters as much as the volume, so a variable low-pass filter helps get maximum performance from your sub/enclosure combination, while a fixed subsonic filter removes the extreme low resonances that cause distortion. A variable bass boost allows you to add some extra low-end punch if you want.  An optional wired remote lets you conveniently adjust the bass level from your front seat.

Rockford Fosgate's Prime Series R2-250X1 amplifier can power your subwoofer with up to 250 watts RMS. You can adjust the low-pass filter, infrasonic filter, and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. 

Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-9106D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.

Do you like it loud and clean? Kicker's CXA360.4 four-channel amplifier can put out 65 watts per channel, so your music will get a big boost in volume and clarity. You could also use this amp in bridged, 2-channel mode to drive a couple of subs or high-performance speakers with 180 watts RMS each. Or, you could power a couple of front speakers with 65 watts each, plus a sub with 180 watts from the amp's bridged rear channels.

The new Alpine PDXM6 amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDXM6 are for the true car audio enthusiast, all from a compact size. Consider the bar raised.  

You won't believe how small and powerful this amp is. Rockford Fosgate's PBR300X2 2-channel amp puts out 100 watts RMS each to a pair of speakers, all from an amp you can easily hold in one hand. You can also put this amp in one-channel mode to drive a sub with 300 watts RMS of bumping bass. And an optional wired remote control lets you add Rockford Fosgate's famous extra Punch from the front seat.

You won't believe how small and powerful this amp is. Rockford Fosgate's PBR300X1 mono amp can drive up to 300 watts RMS into a one-ohm load, allowing you to power multiple subs to get more bass. And this Punch Class BR amplifier generates this power from a very tiny case — literally the size of your hand. Boosted Rail (BR) amp technology uses capacitors and high-speed circuitry to boost the amp's power supply voltage, when needed, so it can handle massive musical peaks without missing a beat.

Rockford Fosgate's Punch P300X2 amplifier sends 100 watts RMS per channel to your speakers, filling your ride with clean music. You can use the high-pass filter to keep the low bass out of your speakers so they perform more efficiently. You can also switch this versatile amp into mono mode to drive a subwoofer with up to 300 watts RMS, then use the built-in low-pass filter to send the correct bass frequencies to your sub. The Punch EQ2 features bass and treble boosts, in case you want to add a little boom or sizzle back into the mix.