This hide-away JL Audio XMD-WHTANT-AM/FM antenna works with most aftermarket head units, including the MM100s-BE and MM50. It features marine-grade materials and is engineered to withstand real saltwater environments. Standard Motorola®-type male plug.

Remote Controller Cable, 6 ft.

Converts the SiriusXM® Connector of MediaMaster® Source Units into an additional Stereo AUX Input This adaptor cable converts the SiriusXM® connector of compatible MediaMaster® source units into a pair of analog auxiliary inputs (2V RMS input sensitivity). Note: Functionality requires updated MediaMaster® software. Not compatible with MM80-HR.

Remote Controller Splitter for Media Master remotes

Remote controller cable for connection of MMR-20 to MM100s - 6 ft (1.83 m)

JL Audio MMC-DN2K-1 Adaptor cable for Deutsch Connector. Adaptor cable to convert Deutsch plug to NMEA 2000® connector for use with MM100s. For MM100s integration with NMEA 2000® networks, a specialty NMEA 2000® connector is required. This adaptor cable converts the 6-way Deutsch plug on your MM100s to a 5-pin, NMEA 2000® micro connector.

Connect MM100s to NMEA network 0.3 m (6 ft)(requires NMEA 2000 compatible cables, connectors, etc. (sold separately) -MMC-DN2K-6

JL Audio MMC-DN2K-6 Adaptor cable for Deutsch Connector. Adaptor cable to convert Deutsch plug to NMEA 2000® connector for use with MM100s. For MM100s integration with NMEA 2000® networks, a specialty NMEA 2000® connector is required. This adaptor cable converts the 6-way Deutsch plug on your MM100s to a 5-pin, NMEA 2000® micro connector.

JL Audio MMC-PN2K-6 powered network cable is designed to simulate an isolated, stand-alone NMEA 2000® network for the connection of a compatible MediaMaster® source unit (sold separately) with one MediaMaster® MMR-40 NMEA 2000® Network Controller (sold separately) or compatible MFD (Multi-Function Display).

This M-RBC-1 wired remote controls the output level of JL Audio's HX-Series and MHX-Series amps — amps designed for powersport and marine applications that need a wired remote built for rough conditions. The remote's cable incorporates waterproof gaskets to keep the electrical connections dry, so you can mount the M-RBC-1 controller in the front of your vehicle or boat, then dial in the amount of bass you want from the driver's seat — mounting instructions, hardware, and an 18-foot cable are included.

Remote Controller Cable, 6 ft.

The JL Audio XMD-USB1X-PNL panel-mount jack facilitates the creation of a permanent port for USB digital devices. An appropriate USB cable for your device is required to make the data connection. This product is designed to be mounted to any flat surface up to 1-inch (25.4mm) thick. Mounting requires a 0.75-inch (19mm) hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements. Overall cable length, 6 ft (1.83 m).

This hardware kit allows you to stack one HD or MHD amplifier onto another. By using multiple kits, it is possible to stack multiple HD and MHD amps. The kit includes four specifically engineered mating bolts, and four threaded, alloy stacking caps.

JL Audio MMC-PN2K-25 25-foot powered network cable allows you to connect your JL Audio MediaMaster NMEA 2000® receiver to a JL Audio MMC-PN2K-25 MMR-40 NMEA 2000 network controller. When the two devices are connected with this cable, you’ll basically create a standalone NMEA 2000 network for your receiver and the MMR-40 or compatible MFD (multi-function display). All devices are sold separately.

Add a handy connection point for your portable audio devices with this panel-mount jack from JL Audio. Designed to mount on any flat surface up to 1" thick, it accepts a 3.5mm stereo miniplug, with a 20" cable that ends in a pair of male RCA jacks. A labeled rubber cover with a snug-fitting seal protects it from the elements. To install it, you'll simply need to drill a 3/4-inch hole, insert the jack, then tighten the plastic wing-nut on the opposite side of the mounting surface.

JL Audio's MBT-RX adapter is the simplest way to add Bluetooth audio streaming capability to almost any stereo system. Compact, tough, and weatherproof, it's ideal for boats, motorcycles, ATVs, golf carts, and more.

Add two USB charging ports to your boat, ATV, or UTV with this panel-mount jack from JL Audio. Designed for off-road and marine use, this easy-to-install jack features a snug-fitting rubber cover that protects the ports from nasty weather. You can mount it on any flat surface up to 1-1/4" thick. You'll need to create a 1-1/8" hole for installation, and the port is tightened into place with a plastic wing-nut on the opposite side of the mounting surface.

Remote Level Control and Cable for Select JL Audio HD, XD, MHD and M Series Amplifiers

The JL Audio XMD-USB2X-PNL panel-mount jack facilitates the creation of a permanent high-power, 5V / 2.1A output charging point for USB digital devices. An appropriate USB cable for your device is required to make the charging connection. This product is designed to be mounted to any flat surface up to 1.25-inch thick. Mounting requires a 1.125-inch hole and is tightened into place with a plastic wing-nut on the opposite side of the mounting surface. A labeled rubber cover with a tight-fitting seal provides protection against the elements. Overall cable length, 6 ft (1.83 m).

The MMP-1-BK mounting adaptor plate allows you to install a MediaMaster® MM100s into existing source unit openings that are larger than needed for the MM100s (up to 8.17 x 3-inch / 208 x 80 mm). Constructed from a single piece of marine-grade, machined aluminum, the MMP-1-BK provides a solid surface to mount your MediaMaster® MM100s in locations previously occupied by other marine manufacturers’ source units.