Shipping and delivery available
Select options at checkout
Power-up your whole system
Do you like your music loud and clear? Kicker's CXA660.5 five-channel amplifier can put out 65 watts to each of your front and rear speakers, plus up to 300 watts RMS for your subwoofer. You could also use this amp to drive a pair of high-performance speakers or components with 180 watts RMS each from bridged channels, and the sub with 300 watts.
Tone controls for the best sound
Separate high-pass filters on the front and rear channels help you sculpt the sound to get the most out of your speakers. A variable low-pass and a fixed subsonic filter help you tune the bass for your sub, enclosure, and vehicle, while a variable bass boost allows you to add some low-end punch. An optional wired remote lets you conveniently adjust the subwoofer level from your front seat.
Hooks in almost anywhere in almost any position
Kicker's Fail-Safe Integration Technology (FIT™) keeps this amp's input free from noise or interference, so you can tap into your speaker wires for a signal without a worry. A 3-second turn-on/turn-off delay eliminates system pops and other noises. The CXA660.5 comes with hardware that lets you mount it vertically, so you can put it in a location that takes up very little floor space and looks cool too.
Product highlights:
- 5-channel car amplifier
- 65 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
- 90 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
- 180 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
- CTA-2006 compliant
- front and rear channels:
- Class AB amp technology
- frequency response: 20-20,000 Hz
- variable high-pass filter (10-200 Hz, 12 dB/octave)
- subwoofer channel:
- Class D amp technology
- frequency response: 25-200 Hz
- variable low-pass filter (50-200 Hz, 12 dB/octave)
- fixed subsonic filter (25 Hz, 24 dB/octave)
- variable bass boost (0-6 dB at 40 Hz)
Other Features:
- preamp and speaker-level inputs
- speaker-level inputs require speaker wire to RCA adapters
- optional remote bass level controller available for sub channel
- 3-second delay for turn-on and turn-off
- includes hardware for vertical mounting
- wiring, fuse, and hardware not included with amplifier
- 4-gauge power and ground leads and an 80-amp fuse recommended
- dimensions: 14-5/8"W x 2-3/8"H x 6-3/4"D
- warranty: 2 years (extends to 3 years when purchased with a Kicker 4-gauge wiring kit)
What's in the box:
Kicker 46CXA660.5 owner's manual
- 5-Channel amplifier
- 2 Vertical mounting brackets
- 3mm Allen wrench
- Four 3/4" Screws
- Owner's manual
- Power chart
- Certified Power certificate
Features & specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) | 65 x 4 150 x 1 |
|
| Peak Power Output (Watts x Channels) | --- | |
| Power at 2 Ohms (Watts x Channels) | 90 x 4 | |
| Bridged Power (Watts x Channels) | 180 x 2 | |
| Minimum Impedance Bridged | 4 | |
| Minimum Impedance Unbridged | 2 | |
| Minimum Impedance | 2 | |
| Best Frequency Response | 10-20000 Hz | |
| THD at Rated RMS Power | 1% | |
| Signal to Noise Ratio | 75 dB | |
| Input Voltage | 14.4v | |
| Features | ||
| Amplifier Class | AB/D | |
| Low-Pass Crossover Frequency | 50-200 Hz | |
| Low-Pass Slope (dB/octave) | 12 dB/octave | |
| High-Pass Crossover Frequency | 10-200 Hz | |
| High-Pass Slope (dB/octave) | 12 dB/octave | |
| Bass Boost | 0-6 dB | |
| Bass Boost Frequency | 40 Hz | |
| Fan Cooled | No | |
| Fuse Rating | 80 | |
| Speaker Level Inputs | RCA | |
| Preamp Outputs | No | |
| Width (inches) | 14-5/8 | |
| Height (inches) | 2-3/8 | |
| Depth (inches) | 6-3/4 | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.