Menu
Cart ​ 0
JL AUDIO 10" 300 Watt 2 Ohm Shallow Subwoofer (92188) - Extreme Electronics

SKU: 10TW12

Vehicle Fit Guide - Click here to find your gear

JL Audio

JL AUDIO 10" 300 Watt 2 Ohm Shallow Subwoofer (92188)

JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 using a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.  

Check for Availability!

  • Save $90!99! 299.00





JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 using a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.

 

The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.

Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch subwoofer driver, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.



  • Very shallow mounting depth (4.36 in / 111 mm)
  • No pole vent: permits mounting close to rear wall of enclosure
  • Extremely small sealed enclosure volume requirements
  • Long linear excursion capability (0.40 in / 10 mm, one-way)
  • DMA-optimized motor design
  • Patented "concentric tube" architecture
  • Patented "floating cone attach method" technology
  • Cast alloy frame with flat edges for tight driver grouping
  • Injection molded, mica-filled polypropylene cone
  • Rubber surround
  • Steel mesh grille included with each driver
  • Precision-built in USA at JL Audio's Miramar, Florida factory
Table_Image
Nominal Diameter 10.0 in / 250 mm
Overall Diameter (A) 10.375 in / 264 mm
Mounting Hole Diameter (B) 9.0625 in / 230 mm
Bolt Hole Circle Diameter (C) 9.7 in / 246 mm
Motor Outer Diameter (D) 4.54 in / 115 mm
Mounting Depth (E) 4.36 in / 111 mm
Front Grille Protrusion (F) 0.87 in / 22 mm
Driver Displacement 0.047 cu ft / 1.33 L
Net Weight 10.5 lb / 4.8 kg