JL Audio's MV1000/1 mono subwoofer amplifier can put out up to 1000 watts RMS for your sub. JL Audio designed this amp to be paired with one or more of their multi-channel MVi Series amplifiers, with the signal routing and processing controlled by the TüN™ software connected to the MVi "master" amp, and this mono amp acting as "slave." You can use the MV1000/1 without an MVi DSP amplifier, but you'll need an active subwoofer crossover for the input signal. The amp also features preamp outputs, so you could set up a larger subwoofer system, for example, by sending those preamp signals on to a separate amplifier for another sub.
Remote control only
You set this amp's gain from your compatible device running JL Audio's TüN™ software.
- PC and Mac OS: TüN 3.0 — requires a USB connection (6' cable included with amp)
- Android and iOS tablets: TüN Mobile — requires Bluetooth connection and the VXi-BTC Bluetooth communicator (sold separately)
- Android phones and Apple iPhones: TüN Express (for Basic setups only) — requires Bluetooth connection and the VXi-BTC Bluetooth communicator (sold separately)
Other accessories you may want with this amp
This MV amplifier features JLid™ inter-device connection ports for JL Audio's proprietary network system for controlling data. The DRC-205 digital remote control lets you adjust the master volume, subwoofer level, switch between up to six preset tunings, and indicates the amp's status via LED. An optional MVi-HUB marine network hub comes in handy when you have three or more MV and MVi amps in your system, coordinating all the adjustments and controls.
Product highlights:
- marine mono subwoofer amplifier
- 600 watts RMS x 1 at 4 ohms
- 1,000 watts RMS at 2 ohms
- Class D amplifier design with NexD2™ switching amp technology
- cast-alloy chassis with marine-grade powder coat finish and corrosion-resistant hardware and connectors
- water-resistance rating IPX2 (can take an indirect splash) when mounted vertically with connections pointed downward
- gain adjustments made with JL Audio's TüN app (PC and Mac) via USB, via Bluetooth (tablets and phones) with BTC Bluetooth option
Connection Features:
- preamp/speaker-level inputs
- speaker wire to RCA adapter required for speaker-level input
- high-level inputs — up to 16 volts RMS (about 60 watts)
- DC offset or signal sensing auto turn-on eliminates need for remote lead
- differential-balanced inputs eliminate noise coming from your vehicle's electrical system
- 2 analog preamp outputs (4V RMS)
- JLid™ connections for optional Network Hub, Bluetooth Communicator, and Digital Remote Control
- USB connection for device running TüN app (6-foot cable included)
- wiring, fuse, and hardware not included with amplifier
- 4-gauge power and ground leads and an 80-amp fuse recommended
- dimensions: 14"W x 2-1/16"H x 6-15/16"D
- weight: 5.6 lbs.
- warranty: 2 years
Features & specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) | 600 x 1 | |
| Frequency Response at Rated RMS Power | 20-500 Hz | |
| THD at Rated RMS Power | 1% | |
| Signal to Noise Ratio | 87 dB | |
| Input Voltage | 14.4v | |
| Peak Power Output (Watts x Channels) | N/A | |
| Power at 2 Ohms (Watts x Channels) | 1000 x 1 | |
| Bridged Power (Watts x Channels) | N/A | |
| Minimum Impedance Bridged | N/A | |
| Minimum Impedance Unbridged | 2 | |
| Features | ||
| Amplifier Class | D | |
| Low-Pass Crossover Frequency | N/A | |
| Low-Pass Slope (dB/octave) | N/A | |
| High-Pass Crossover Frequency | N/A | |
| High-Pass Slope (dB/octave) | N/A | |
| Bass Boost | No | |
| Bass Boost Frequency | N/A | |
| Fan Cooled | No | |
| Fuse Rating | 80 | |
| Speaker Level Inputs | Yes | |
| Preamp Outputs | 1 pair | |
| Height (inches) | 2-1/8 | |
| Width (inches) | 14 | |
| Depth (inches) | 8-3/8 | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.