Shipping and delivery available
Select options at checkout
Let everyone enjoy the party on your boat with the Kicker KMA600.6 six-channel amplifier. Think of this powerhouse performer as three amps in one, supplying the boost your music needs to the bow, midships, and stern on your pleasure craft. For full-range operation, you've got 50 watts per channel at your command, ready to drive speakers in three separate zones. If you're ready to drop a serious depth charge, you can use this amp in bridged 3-channel mode to fire a bass broadside of 200 watts RMS to each of three subwoofers. High- and low-pass filters and a bass boost help you get maximum performance from your setup.
Marine-ready
Kicker has made sure this amp will stand up to the life aquatic, with conformal-coated PC boards to protect against dust and water. The amp also features stainless-steel hardware so you don't have to worry about rusty terminals shorting out your good times on the water.
Product highlights:
- 6-channel marine amplifier
- 50 watts RMS x 6 at 4 ohms
- 100 watts RMS x 6 at 2 ohms
- 200 watts RMS x 3 bridged (4-ohm stable in bridged mode)
- can be used to amplify 3 separate zones, or two zones and a sub
- CEA-2006 compliant
- Class A/B design
- variable high-pass filter (0-200 Hz, 12 dB/octave), amps 1 and 2
- variable low- and high-pass filter (50-200 Hz, 12 dB/octave), amp 3
- variable bass boost (0-6 dB at 40 Hz), amp 3 only
Other Features:
- weather-resistant conformal-coated circuit boards
- stainless-steel no-rust hardware
- preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input))
- wiring and hardware not included with amplifier
- 4-gauge power and ground leads and a 80-amp fuse recommended
- dimensions: 7-1/8"W x 2-5/16"H x 13-15/16"D
- warranty: 2 years
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) | 50 x 6 | |
| Frequency Response at Rated RMS Power | --- | |
| THD at Rated RMS Power | --- | |
| Signal to Noise Ratio | --- | |
| Input Voltage | N/A | |
| Peak Power Output (Watts x Channels) | --- | |
| Power at 2 Ohms (Watts x Channels) | 100 x 6 | |
| Bridged Power (Watts x Channels) | 200 x 3 | |
| Minimum Impedance Bridged | --- | |
| Minimum Impedance Unbridged | --- | |
| Features | ||
| Amplifier Class | Not Given | |
| Low-Pass Crossover Frequency | 50-200 Hz | |
| Low-Pass Slope (dB/octave) | 12 dB/octave | |
| High-Pass Crossover Frequency | 50-200 Hz | |
| High-Pass Slope (dB/octave) | 12 dB/Octave | |
| Bass Boost | 0-6 dB | |
| Bass Boost Frequency | 40 Hz | |
| Fan Cooled | --- | |
| Fuse Rating | --- | |
| Speaker Level Inputs | --- | |
| Preamp Outputs | No | |
| Height (inches) | 2-5/16 | |
| Width (inches) | 7-1/8 | |
| Depth (inches) | 13-15/16 | |
| Parts Warranty | 2 Years | |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.