WaterPROOF & DustPROOF
IPX7/IPX6/IP6X certified. The amplifier can be submerged in up to 3.3 feet of water for 30 minutes, and can resist high-pressure, heavy sprays of water.
Shipping and delivery available
Select options at checkout
EXTREME Durability
Salt Spray PROOF
ASTM B117 salt spray (or salt fog) corrosion testing ensures the amplifier will not corrode or fail in saltwater and other harsh environments.
Vibration PROOF
Thick 1/4" die-cast frame suppresses vibration.
Raised drain tunnel prevents moisture buildup.
ULTIMATE Performance
Increased Power Flow
Metal studs enable high current flow for connections between the amplifier and battery, resulting in powerful bass reproduction.
High Quality Capacitors
PMLCAP's (Polymer Multi-Layer Capacitors) are utilized in the LC filter circuits to decrease distortion, ensuring clear detail for a truer to life sound.
Magnetic Shielding
Magnetic shields for the output coils reduce radiated noise, further contributing to smooth and accurate bass frequency signals.
Selectable Connection
Speaker Level Input
If your receiver does not have RCA outputs, you can connect your speaker cables directly to the KAC-M5001's RCA cables to use as an audio signal input.
Wired Level Control Included
Waterproof certified wired remote level control allows you to easily adjust the subwoofer volume.
System EXPANSION Ready
KENWOOD Audio Receivers and the KAC-M5024BT have RCA outputs to expand the system to connect to the KAC-M5001 mono amplifier and subwoofer.
＊Subwoofers pictured here are not water-resistant
x2 Paired Parallel Speaker cables
for easier connection to 2 subwoofers or a single Dual Voice Coil subwoofer.
Take CONTROL
Overview
- IP67/IP66 Certified Waterproof & Dustproof
- RMS 200W (4Ω)
- RMS 300W (2Ω)
- Speaker Level Input
- Signal Sensing Turn-on
- Wired Level Control Included
- (W)7-13/16” x (H)1-15/16” x (D)4-1/8”
Specifications |
KENWOOD COMPACT DIGITAL AMPLIFIER |
| Type | MARINE/POWERSPORTS DIGITAL AMPLIFIER |
SPECIFICATIONS |
|
| Amplifier Type | Class D |
CEA-2006 PRIMARY RATINGS |
|
| Power Output | 200Watts RMS x 1 at 4 Ohms, ≤1%THD+N |
| Signal-to-Noise Ratio | 78dBA (Reference: 1Watt into 4Ohms) |
MAXIMUN POWER OUTPUT |
|
| Max Power | 600W |
RMS POWER AT 14.4V |
|
| 4 Ohms | 200Watts RMS x 1 at 4 Ohms, 20-200Hz , ≤1% THD+N |
| 2 Ohms | 300Watts RMS x 1 at 2 Ohms, 100Hz, ≤1%THD+N |
SPECIFICATIONS |
|
| Signal to Noise Ratio | 97dB (Reference: Rated Power into 4Ohms at 14.4V) |
| Frequency Response | 20Hz-200Hz (+0dB, -3dB) |
| Input Impedance | 10k ohm |
| Speaker Impedance | 4Ω ( 2Ω to 8Ω allowable) |
AUDIO SECTION |
|
| Low-pass Filter | 50-200Hz, -24dB/oct |
| High-pass Filter | - |
| Infrasonic Filter | 20Hz, -24dB/oct |
| Bass Boost Control | 40/60/80Hz, 0dB - +18dB |
| RCA Input Sensitivity | 0.2 (V) - 5.0 (V) |
| Speaker Level Input Sensitivity | 4.0 (V) - 12.0 (V) |
TERMINAL |
|
| Battery & Ground | 12" 10-gauge Pigtail Cable with Molded Strain Relief Bushing |
| Speaker Output | 12" 18-gauge x2(Parallel) Pigtail Cable with Molded Strain Relief Bushing |
| Line In (Pigtail RCA) | Yes |
| Pre Out (Pigtail RCA) | No |
| Speaker Input (Pigtail RCA In) | Yes |
| Connector for Wired Remote Controller | Pigtail Connector (4pin) |
GENERAL |
|
| Dimensions(WxHxD) | 198[mm] x 48.5 [mm] x 104 [mm] , (7-13/16" x 1-15/16" x 4-1/8") |
| Weight (kg) | 1.2 [kg] 2.7 [lbs] |
| Operating Voltage | 14.4V (11-16V allowable) |
| Current Consumption | 14A |
| Fuse | 40A |
KEY FEATURES |
|
| CTA-2006 Compliant | |
| Class D | |
| Power MOS-FET Switching Power Supply | |
| 2 Ohms Load Capability | |
| One-Sided Connection | |
| Line Input Terminals | |
| Speaker Level Input | |
| Signal Sensing Turn-on | |
| Remote Level Control | |
| Terminal Cover | |
| Audio Controls on the Side | |
| Corrosion-Resistant Sealed Cast Aluminum Chassis | |
| Drain Tunnel | |
| Water-proof & Dust-proof (Main Unit/DC cable) | |
| Water-proof (Remote Control) | |
| ASTM B117 (Main Unit) | |
| UV Resistant ( Remote Control) | |
OTHER FEATURES |
|
| Fuse Rubber Cover | |
ACCESSORIES |
|
| Wired Remote Control Unit with Attached 23.6' (6m) Cable | |
| Nut,1pc and Washer,1pc for remote unit mounting | |
| Stainless Steel Self-tapping Screw (Φ4 x 16mm) 4pcs | |
| 4" Plastic Wire Tie, 1pc | |
| Instruction Manual | |
| Warranty Card | |
Contact us for more information
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Recently viewed
- Opens in a new window.