Shipping and delivery available
Select options at checkout
Automatic bass
Now you can get fantastic, powerful bass without shelling out a lot of money for a huge amp or spending too much time tuning the system after installation. Kicker's KEY500.1 compact subwoofer amplifier features automatic signal processing that tailors the sound to blend in perfectly with your specific stereo system. And this compact power pack can send up to 500 watts RMS to your sub.
KEY Auto Setup tunes in minutes, not hours
After installation, you download both the Key sine sweep and a test tone from Kicker. You set the amp gain using the test tone and a KEY indicator light. The KEY Auto setup with the sine sweep analyzes your system's response and applies the equalization and bass boost necessary to produce great bass. Then later, with the KEY button, you can A/B the sound before and after processing to amaze your friends and family.
Start-Stop problem solved
Some eco-friendly cars actually turn off their engines when stopped, and then start up again when the brakes are released. The voltage dip during starting could shut down an amplifier or allow it to pass a dangerous clipped signal to the sub. The KEY500.1 prevents these issues by automatically engaging a limiter in these circumstances.
Integrates well
This amp's so tiny, it'll fit almost anywhere in almost any vehicle. Kicker's FIT2™ technology, using speaker-level inputs with DC offset sensing turn-on, ensures this amp will work in just about any vehicle, even one a factory amplified system. The Radio-Detect feature makes sure you never get a "No Speakers Detected" message on your receiver's display when you install this amp.
Product highlights:
- mono subwoofer amplifier
- 150 watts RMS x 1 at 4 ohms
- 300 watts RMS x 1 at 2 ohms
- 500 watts RMS x 1 at 1 ohm
- Class D amp technology
- KEY Auto Setup customizes the signal for your stereo system
- test tones available from Kicker.com
- automatic adjustments include bass restoration and EQ
- variable low-pass filter (40-160 Hz, 24 dB/octave)
- variable subsonic filter (10-40 Hz, 24 dB/octave)
More Info:
- preamp and speaker-level inputs
- DC offset sensing turn-on with speaker-level inputs
- Radio-Detect circuit supplies speaker load for receiver to sense
- wiring, fuse, and hardware not included with amplifier
- 8-gauge power and ground leads and a 60-A fuse recommended
- dimensions: 8-3/16"W x 1-3/4"H x 3-11/16"D
- warranty: 1 year
What's in the box:
Kicker 47KEY500.1 owner's manual
- Mono amplifier
- 12" Input harness (4-pin Molex to female RCA)
- Four 1" screws
- Two 12" wire-ties
- 3mm Allen key
- Quickstart guide
- Kicker Tech Support information
Features & specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) | ||
| Peak Power Output (Watts x Channels) | --- | |
| Power at 2 Ohms (Watts x Channels) | 300 x 1 | |
| Bridged Power (Watts x Channels) | --- | |
| Minimum Impedance Bridged | --- | |
| Minimum Impedance Unbridged | 1 | |
| Minimum Impedance | 1 | |
| Best Frequency Response | 10-160Hz Hz | |
| THD at Rated RMS Power | --- | |
| Signal to Noise Ratio | 90 dB | |
| Input Voltage | --- | |
| Features | ||
| Amplifier Class | D | |
| Low-Pass Crossover Frequency | 40-160Hz | |
| Low-Pass Slope (dB/octave) | 24dB/octave | |
| High-Pass Crossover Frequency | N/A | |
| High-Pass Slope (dB/octave) | --- | |
| Bass Boost | 0-6dB | |
| Bass Boost Frequency | 40Hz | |
| Fan Cooled | No | |
| Fuse Rating | 60 | |
| Speaker Level Inputs | Harness | |
| Preamp Outputs | No | |
| Width (inches) | 8-3/16 | |
| Height (inches) | 1-3/4 | |
| Depth (inches) | 3-11/16 | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.