Shipping and delivery available
Select options at checkout
The PROXP-20-THUNDER5 audio kit is a complete plug and play 5-speaker audio system designed for the Polaris RZR Pro XP platform*. This kit fits all models that DO NOT have an installed Ride Command system. The heart of this system is the MTX AWMC3 media receiver that mounts in the upper dash factory panel and provides a full function, feature rich audio experience. Power for the system if provided by the included MUD100.4 4-channel and MUD600-1 monoblock amplifiers. Front audio reproduction is handled by a set of the PROXP-20-FS component speakers. The lower 6 ½” rotationally molded speaker pod is designed to install in a matter of minutes and feature integrated RGB lighting while the 1” soft dome tweeter mounts in the upper dash top factory enclosure. Low end comes from the PROXP-20-SW subwoofer enclosure with its high output 10” subwoofer in a ported enclosure that mounts in the dash on the passenger side of the vehicle. Rear sound is provided by a pair of our MUD65PL speaker cans which feature integrated RGB lighting in a compact design with plug and play connectivity. Connections are made via integrated quick connect, watertight harnesses designed for harshest of riding environments. *Not Compatible with non-Pro XP Model RZR’s.
MTX RZR Pro XP kits are compatible with the following RZR models:
| RZR Models | 2020 | 2021 | 2022 |
|---|---|---|---|
| RZR Pro XP / XP4 Sport |  |
|
|
| RZR Pro XP / XP4 Premium | |
|
|
| RZR Pro XP / XP4 Ultimate | |
|
|
| RZR Pro XP / XP4 Sport RFLE | |
||
| RZR Pro XP / XP4 Ultimate RFLE | |
||
| RZR Pro R / R 4 Sport | |
||
| RZR Pro R / R 4 Premium | |
||
| RZR Pro R / R 4 Ultimate | |
||
| RZR Turbo R / R 4 Sport | |
||
| RZR Turbo R / R 4 Premium | |
||
| RZR Turbo R / R 4 Ultimate | |
Fitment Guide Note: The amp racks are not compatible with Polaris heater option.
AWMC3 Key Features
- 3" Full Color TFT Display
- SiriusXM Radio Ready**
- AM / FM / WB Tuner
- Bluetooth Audio Streaming
- Internal Power Amplifier
- Weather Resistant (IP66)
- 2 Sets of Preouts (Front / Rear)
- Selectable EQ
- Backlit Control Buttons
- **SiriusXM antenna/receiver and external AM/FM antenna not included.
PROXP-20-FS Key Features
- All-Weather Construction with UV Inhibitor
- Custom Fit for Dash Panel Panel
- No Cutting or Drilling Required
- 6.5" Midrange Speaker
- 1.0" Teteron Soft Dome Tweeter
- 75-Watt RMS Power
- Integrated RGB Lighting
- Fully assembled Out of the Box
MUD100-4 Key Features.
- Compact Design Enables Installation Anywhere
- Conformal Coated Printed Circuit Board that Resists Moisture
- Fixed Crossovers
- High and Low Level Inputs
- 400-Watts RMS Power
MUD65PL Key Features.
- Weather Resistant 6.5" Speaker Pods
- Fits Bars with Diameters of 1.75", 1.85", and 2"
- Internal Crossover Network
- ABS Impact Resistant Grille with UV Inhibitor
- Integrated RGB Lighting
- Optional Remote Control and Wiring Harness Available for Custom Color Creation (MUDLEDC)
MUD600.1 Key Features
- High Efficiency Class D Topology
- Compact Design Enables Installation Anywhere
- Conformal Coated Printed Circuit Board that Resists Moisture
- Fixed Crossovers
- High and Low Level Inputs
- 600-Watts RMS Power
PROXP-20-SW Key Features
- 10" Custom Fit Subwoofer Enclosure
- 400-Watt RMS Power
- High Mount Ported
- Mounts Behind Dashboard on Passenger Side
- Quick Installation with Installer Friendly Design
- Fully assembled Out of the Box
Plug and Play Connections
The PROXP-20-THUNDER5 includes all the wiring required to connect each component. All wiring is ruggedly designed to endure the harsh environments RZRs often find themselves in. All wires are terminated with the appropriate plug for the component being connected, making installation easy.Overview
- AWMC3 ALL-WEATHER MEDIA CONTROLLER WITH 3" DISPLAY
- 3" Full Color TFT Display
- SiriusXM-Ready™ (SiriusXM Connect Vehicle Tuner and Subscription Sold Separately)
- AM / FM / WB Tuner
- Bluetooth® Audio Streaming
- Internal 4 x 50 Watt Power Amplifier
- AUX Input
- USB Charging
- iPhone® - Unit Will Charge and Play Music Through USB*
- Android® - Unit Will Charge, but Will Not Play Music Through USB
- Unit Will Play Music and Display Album Artwork Using a USB Memory Stick (.mp3)
- Weather Resistant (IP66)
- Selectable EQ
- 2 Sets of Preouts (Front / Rear)
- Backlit Control Buttons
- PROXP-20-FS POLARIS® RZR® PRO XP FRONT SPEAKER PODS
- Tweeter
- Teteron Dome Tweeter for High Output and Accurate Audio Reproduction
- Adjustable Tweeter Attenuation for Fine Tuning of Output
- Tweeter Mounts in OEM Factory Housing
- Midrange
- Fully Assembled and Prewired Enclosure
- Installer Friendly Enclosure Design for Easy Installation
- Integrated RGB Lighting
- Mounts Behind Factory Grille Maintaining OEM Cosmetics
- Utilizes Factory Mounting Assembly
- Compatible with OEM or MTX Subwoofer Installed
- MUD100.4 AMPLIFIER
- Compact Size
- Double Sided PCB
- Surface Mount Components
- MOSFET Design
- LPF and HPF Crossover
- Noise Free Design
- MUD65PL CAGE MOUNT SPEAKER WITH RGB LEDS
- Integrated RGB LED Lighting
- Includes Rotating Brackets for 1.75", 1.85", and 2" Bars
- ABS Impact Resistant Enclosure and Grille with UV Inhibitor
- Polypropylene Woofer and Mylar Dome Tweeter
- MUD600-1 MONO BLOCK AMPLIFIER
- Compact Size
- Double Sided PCB
- Surface Mount Components
- MOSFET Design
- LPF Crossover
- Noise Free Design
- Optional Remote Bass Knob (EBC-01)
- PROXP-20-SW POLARIS® RZR® PRO XP SUBWOOFER ENCLOSURE
- Ported Enclosure Design Produces Louder, Deeper Bass Output
- Includes an MTX 55 Series Subwoofer for its Deep Bass Reproduction Capabilities
- Compatible with Existing OEM Front Speaker Enclosures
- Mounts Behind Dashboard
- Factory Matched Texture
- Installer Friendly Design
- Direct Fit, No Cutting or Drilling Required
- MUDLEDC LED REMOTE CONTROL
- This remote expands the functionality of RGB LED equipped components like the MUD65PL. Up to 12 speakers can be connected to the MUDLEDC in parallel. For additional speakers, additional remotes will be required
Specifications |
MTX Audio PROXP-20-THUNDER5 ,5-SPEAKER AUDIO SYSTEM FOR POLARIS RZR PRO XP VEHICLES |
| Type | POWERSPORTS AUDIO |
AWMC3 ALL-WEATHER MEDIA CONTROLLER WITH 3" DISPLAY SPECIFICATIONS |
|
Tuner FM |
|
| Frequency Range | 87.5 - 107.9 MHz (America) , 87.5 - 108 MHz (Europe) |
| Channel Step | 200 kHz (America) 50 kHz (Europe) |
| Sensitivity | 2.8 μV |
| Stereo Separation | 30dB |
| Signal to Noise Ratio | 50dB |
TUNER AM |
|
| requency Range | 530 - 1710 KHz (America) , 522 - 1620 KHz (Europe) |
| Usable Sensitivity | 32dB |
TUNER WB |
|
| Frequency Range | 162.4 - 162.55 MHz |
LINE-OUT |
|
| Output | 2V |
| Impedance | 10k Ohm |
GENERAL |
|
| Power Supply | 12V DC (10.8-15.6V allowable) |
| Speaker Impedance | 2 - 8 ohm |
| Output Power | 50W x 4CH |
| Fuse | 20A |
PROXP-20-FS SPECIFICATIONS |
|
| RMS Power Handling | 75-Watts |
| Peak Power Handling | 150-Watts |
| Sensitivity (2.83V/1m) | 92dB |
| Sensitivity (1W/1m) | 87.6dB |
| Frequency Response | 70Hz - 20kHz |
| Impedance | 3.4Ω |
MUD100.4 AMPLIFIER SPECIFICATIONS |
|
| Description | 50 W RMS/CH Stereo |
RMS POWER AT 14.4V |
|
| 4Ω Bridged Load | 200 W RMS |
| 2Ω | Load 100 W RMS |
| 4Ω | Load 50 W RMS |
FEATURES |
|
| Input Level | 0.2 - 5V Low Level, 0.4 - 10V High Level |
| Frequency Response | 10Hz - 32 kHz |
| Low Pass Filter (LPF) Rear Only | 80Hz Fixed |
| High Pass Filter (HPF) Rear | 80Hz Fixed |
| High Pass Filter (HPF) Front Selectable | 80/200Hz |
| THD at 4Ω , 1W | <0.2% |
| Signal-to-Noise Ratio | >75dB |
| Minimum Load | 2Ω |
| Low Voltage Protection | Yes, Protect <8.5V |
| Components & PCB | SMD Parts / Double Sided FR-4 PCB |
DIMENSIONS |
|
| Height | 1.86" (47.2mm) |
| Width | 5.51" (140mm) |
| Length | 6.52" (165.5mm) |
MUD65PL CAGE MOUNT SPEAKER WITH RGB LEDS SPECIFICATIONS |
|
| RMS Power Handling | 50-Watts |
| Peak Power Handling | 100-Watts |
| Sensitivity (2.83V/1m) | 89.9dB |
| Sensitivity (1W/1m) | 85.6dB |
| Frequency Response | 70Hz - 20kHz |
| Impedance | 4Ω |
| Fits Bars | 1.75", 1.85", and 2" |
WIRE COLOR |
|
| Grey / Black | +/- speaker wire |
| Black / Red / Green / Blue | +/ground speaker illumination |
IN THE BOX |
|
| Speaker and Enclosure | |
| Brackets | |
| For Mounting the Bracket Base to the Enclosure | (8) M6-1.0x14mm Stainless Steel Hex Bolt , (8) M6 Stainless Steel Flat Washer (8) M6 Stainless Steel Split Lock Washer |
| For Tightening the Bracket Strap to the Base | (2) M6-1.0x50mm Stainless Steel Hex Bolt , (2) M6 Stainless Steel Serrated Flange Lock Nut |
MUD600-1 MONO BLOCK AMPLIFIER |
|
| Description | Class D Mono Amplifier |
PRIMARY RATINGS |
|
| Primary Power | 300 W RMS at 4Ω, 20-165Hz and ≤ 1% THD+N* |
| Signal-to-Noise Ratio | 85 dBA |
SECONDARY RATINGS |
|
| Dynamic Power | 425 W at 4Ω, ≤ 1% THD+N , 650 W at 2Ω, ≤ 1% THD+N |
FEATURES |
|
| Input Level | 0.2 - 5V Low Level, 0.4 - 10V High Level |
| Frequency Response | 10Hz - 250 Hz |
| Low Pass Filter (LPF) | 40-250Hz Variable |
| Minimum Load | 2Ω |
| Low Voltage Protection | Yes, Protect <8.5V |
| Components & PCB | SMD Parts / Double Sided FR-4 PCB |
DIMENSIONS |
|
| Height | 1.85" (47mm) |
| Width | 5.51" (140mm) |
| Length | 7.36" (187mm) |
PROXP-20-SW POLARIS® RZR® PRO XP SUBWOOFER ENCLOSURE |
|
| 10" Loaded Subwoofer Enclosure | |
| RMS Power Handling | 400-Watts |
| Peak Power Handling | 800-Watts |
| Sensitivity (2.83V/1m) | 90.2dB |
| Sensitivity (1W/1m) | 83.5dB |
| Frequency Response | 28Hz - 130Hz |
| Impedance | Dual 4Ω |
MUDLEDC LED REMOTE CONTROL |
|
| Dynamic Modes | 19 Modes |
| Static Colors | 20 Colors |
| Brightness | 5 Levels |
| Speed | 10 Levels |
| Demo Mode | Yes |
| Working Voltage (V) | +12 |
| Output Current (A) | 3-way, 4A peak per channel |
| Remote Frequency (MHz) | 433.92 |
| Remote Distance (M) | 30 (open area) |
Contact us for more information
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.