Shipping and delivery available
Select options at checkout
Rockford Fosgate's Power Series T1000X5ad 5-channel amplifier can send 100 watts RMS each to four separate speakers while delivering up to 600 watts RMS to a subwoofer. Or you could use this tiny powerpack to run a couple of high-performance components with 200 watts each along with 600 watts RMS for the sub. A dual-fan forced air cooling system keeps this sturdy little amp from overheating, so it can play hard for a long time.
Class AD: accurate and powerful
Rockford Fosgate uses their proprietary Class AD amplifier technology, combining the high fidelity of a Class A system with the high efficiency of their special Class D technology, to bring you this ultra-efficient, high-output amplifier. In other words, this compact amp produces more power with less current draw from your vehicle's charging system than most other amps on the road today.
Rockford Fosgate's high-tech solutions yield more power
This Power Series amplifier actively monitors speaker and subwoofer performance, using Rockford Fosgate's Constant Power technology. A speaker's impedance naturally fluctuates as it performs, fighting against your amp's output. So, just like your cruise control increases the engine's RPM to maintain your car's speed uphill, Constant Power maintains this amp's output by increasing its internal voltage and current flow when the speaker's impedance rises. This results in up to a 25% increase in the amp's total power output.
Easy to set for optimum performance
Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your Power amp. At quiet listening levels, you'll hear less background noise and more of your music.
Clip lights monitor distortion
If that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping and restore pristine sound.
Features and Specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) | 100 x 4 400 x 1 |
|
| Peak Power Output (Watts x Channels) | N/A | |
| Power at 2 Ohms (Watts x Channels) | 100 x 4 | |
| Bridged Power (Watts x Channels) | 200 x 2 | |
| Minimum Impedance Bridged | 4 | |
| Minimum Impedance Unbridged | 2 | |
| Best Frequency Response | 20-20k Hz | |
| THD at Rated RMS Power | 1% | |
| Signal to Noise Ratio | 80 dB | |
| Input Voltage | 14.4v | |
| Features | ||
| Amplifier Class | A/D | |
| Low-Pass Crossover Frequency | 50-250 Hz | |
| Low-Pass Slope (dB/octave) | 12 dB/octave | |
| High-Pass Crossover Frequency | 50-250 Hz | |
| High-Pass Slope (dB/octave) | 12 dB/octave | |
| Bass Boost | 0-18 dB | |
| Bass Boost Frequency | 45 Hz | |
| Fan Cooled | Yes | |
| Fuse Rating | 100 | |
| Speaker Level Inputs | Harness | |
| Preamp Outputs | No | |
| Width (inches) | 12-1/2 | |
| Height (inches) | 1-11/16 | |
| Depth (inches) | 4-5/16 | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.