Episode Response DSP 8 Channel Amplifier (EARSP8D100)

EpisodeSKU: EARSP8D100

Sale price $0.00

Episode® Response Series DSP Amplifiers

Episode Response Series amplifiers take multiroom audio to the next level, giving pros a matrix switching DSP amp that delivers incredible audio in up to 8 rooms - all in one convenient package. Available in three models, 8, 12, and 16 channels (4, 6, and 8 zones), these amps utilize a high-tech digital signal processing that provides clean and accurate audio in any space. They are also IP controlled, OvrC compatible, and have drivers for all popular control systems for an easy-to-control audio experience. With our Response Series amps, simply add sources and you're set.

EA-RSP-12D in a rack

Clean and Fast Installs

Save space and time with the Response Series amps. It has a pre-amp, DSP, matrix switch, and amplification built-in to a single chassis, which saves rack space and cuts down on wiring to make your job easier – all while delivering superior sound.

Digital Signal Processing and Mixing

Digital Signal Processor, or DSPs, are essential in creating great sound. The built-in DSP delivers stellar audio in a variety of spaces with its onboard 10-band parametric EQ, as well as full volume and other mixing capabilities per output channel, letting you and your customer find the perfect sound in every zone via a browser UI.

Response Series Control System Integration

Control System Integration

Response Series amps easily integrate with Control4 and other popular control systems. With a full set of pre-built drivers, it’s just a matter of dropping in a file to integrate with the control system of your choice.

EA-RSP-2D-200 ir port image

IP Controlled

Equipped with IP control, this amp is not only a breeze to automate, but it’s also easily configured during your install, giving you and your customers a flawless experience with easy monitoring and control. For legacy installs, control Response Series amps with the built-in IR port.

Image of the back of the Response 16D 100

Sub Out in Every Zone

Dedicated subwoofer outputs per zone make wiring and configuration simple and fast, letting you add an Episode  architectural Subwoofer  and Digital Subwoofer Amplifier to any room. Adding a subwoofer gives your customers full-frequency audio that delivers a rich and full audio experience that's incredibly accurate and satisfying.

Smart & Powerful

These amps pump out 100 watts per channel at 4-ohms and 50 watts at 8-ohms for powerful multiroom audio. Additionally, each Response Series amp is IP controlled, OvrC enabled, and features Signal Sensing and a 12v trigger for power saving - making these amps easy to integrate and easy to use.

Image of the back of the Response 2D 200

Reliable Amplification

These amps feature an active variable/dynamic cooling system to increase longevity. They also feature anti-clipping technology that protects both the amp and speakers from being overdriven. Rackmount ears are included and pre-installed for easy mounting.

Superior Sound

Built-in Signature By Episode  presets make these amps the perfect match for our flagship speaker line, delivering the best sound every time. Plus, you can create, backup, and upload custom presets using built-in test signals and audio analytics. And for detailed audio, each amp has an adjustable low-pass/high-pass filter when using subwoofers.


  • Clean and Fast Installs
  • Digital Signal Processing and Mixing
  • Control System Integration
  • IP Controlled
  • Sub Out in Every Zone
  • Smart & Powerful
  • Reliable Amplification
  • Superior Sound





Impedance Input RCA analog input: 20kΩ
Power Output @ 4 ohm 2 channels driven: 2 × 100W 1 kHz All Channels: 8 x 100W 1 kHz
Power Output @ 8 ohm 2 channels driven: 2 × 50W 1 kHz All Channels: 8 × 50W 1 kHz
Power Output Bridged @ 8 ohm 4 x 200W 1 kHz
Sensitivity Input 1 Vrms
Topology Class D
Total Harmonic Distortion (THD) 0.01% 1 kHz @ 1/8 rated power 4Ω or 8Ω
Connector Type 1 x RJ45 (ethernet), Stereo RCA inputs, 8x Analog loop output, 8 channels: 4 stereo or bridged output Speaker outputs
Fan Description Two fans mounted, 1 each in left and right sides
Frequency Response 20 Hz - 20 kHz < ± 2 dB
Power Connection Type NEMA 5/15P 3 prong to IEC 60320 C13, 1.8m length
Certifications UL, CE, FCC
Dimensions (W x H x D) 19" × 16.7" × 3.5" (483 × 424 × 89 mm) With feet: 19" × 16.7" × 4" (483 × 424 × 101 mm)
Operating Humidity 20-90% RH
Operating Temperature -10 to +50 °C (+14 to +122 °F) (indoor)
Power Consumption 800W
Storage Temperature -30 to +70 °C (-22 to +158 °F)
Weight 18.7 lb. (8.5 kg)
Signal to Noise Ratio >95 dB A-weighted @ rated power
Nominal Impedance 1 ohm
RJ45 Auto Sensing 2.5 mVrms
LED Indicators Front power LED: 1x Blue LED light bar System status LED: 12 x Bi-color LED
Dynamic Range > 100 dB A-weighted @ rated power
Channels 8-Channel

Contact us for more information

Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed